Bale Shredding Complex CGS-1
Bale Shredding Complex rapeseed-straw Series "BriqTech" model: CGS-1 Bales maximum diameter 1.8 meters Productivity up to: 600-1500 kg/hour Created in the Czech Republic by Briquetting Technology series "BriqTech" and "PellTech" ® - Assembled in the Czech Republic and EU Over 20 years experience | 24 months warranty + 36 months extended warranty | Generation 3 | Industry 4.0 Technology | Fast intervention 24–72h | Parts in stock | Complete service | Eligible for financing through European funds
The bale shredding complex CGS-1 from the series “BriqTech” is a solution for biomass processing before the manufacture of briquettes and pellets. The equipment combines shredding bales with fine grinding, so that the resulting material is prepared for the next stages of processing.
The assembly includes the straw bale shredder CGS-1the hammer mill H-119/7SN and the control panel with integrated automation Industry 4.0 – PLC & HMI.
Technical characteristics
The productivity is 600-1500 kg/hour, depending on the raw material. The complex is designed for cylindrical and rectangular straw bales, with a maximum diameter of 1.8 meters. The moisture content of the raw material can be a maximum of 25%, and the density of the bales can reach 120 kg/m.cubic.
- Number of straw chopper knives: 361 pcs
- Number of hammer mill knives: 14 pcs
- Weight: 2500 kg
- Length: 7000 mm
- Width: 2060 mm
- Height: 2055 mm
Compatible raw materials
- cylindrical straw bales
- rectangular straw bales
- biomass intended for the production of briquettes and pellets
- resulting material for feed or bedding for animals
Operating principle
The technology used starting in 2025 works in two stages. In the first stage, the chopper CGS-1 crushes the straw bales. In the second stage, the hammer mill H-119/7SN shreds the raw material to 3-10 mm, depending on the sieve.
Included components
- Straw bale chopper CGS-1
- Hammer mill model: H-119/7SN
- Control panel and electric control
- Integrated automation Industry 4.0 – PLC & HMI
- Inverter
- 10 meter three-phase cable
Optional accessories
- Bag filter
- Good overload sensor
The final fraction is ready for further processing in briquetting or pelletizing lines. The assembly can be integrated into technological flows for the efficient and organized utilization of biomass.
